HP Pavilion dv6-3000 CTO Laptop Motherboard is Refurbished. the motherboard as a replacement for your hp laptop, this hp pavilion dv6-3000 cto motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original hp pavilion dv6-3000 cto system board.
Related Laptop Model:
Pavilion dv6-3070er
Pavilion dv6-3056tx
Pavilion dv6-3005eo
Pavilion dv6-3003xx
Pavilion dv6-3008et
Pavilion dv6-3026er
Pavilion dv6-3020sw
Pavilion dv6-3090ca
Pavilion dv6-3070ec
Pavilion dv6-3030ek
Pavilion dv6-3060ev
Pavilion dv6-3001st
Pavilion dv6-3025et
Pavilion dv6-3013eg
Pavilion dv6-3065tx
Pavilion dv6-3048sa
Pavilion dv6-3043es
Pavilion dv6-3012el
Pavilion dv6-3020sb
Pavilion dv6-3075sf
Pavilion dv6-3013sl
Pavilion dv6-3040tx
Pavilion dv6-3085ef
Pavilion dv6-3020so
Pavilion dv6-3014so
Pavilion dv6-3006tx
Pavilion dv6-3020ee
Pavilion dv6-3085ea
Pavilion dv6-3075tx
Pavilion dv6-3005sa
Pavilion dv6-3010tx
Pavilion dv6-3040sd
HP Pavilion dv6-3000 CTO laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the HP Pavilion dv6-3000 CTO motherboard and HP Pavilion dv6-3000 CTO fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
