HP pavilion g6-2308sr Laptop Motherboard is Refurbished. the motherboard as a replacement for your hp laptop, this hp pavilion g6-2308sr motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original hp pavilion g6-2308sr system board.
Related Laptop Model:
pavilion g6-2323ew
pavilion g6-2311so
pavilion g6-2303et
pavilion g6-2322ex
pavilion g6-2303st
pavilion g6-2360se
pavilion g6-2304eia
pavilion g6-2359ee
pavilion g6-2356so
pavilion g6-2359er
pavilion g6-2305eg
pavilion g6-2340sj
pavilion g6-2330ee
pavilion g6-2338ee
pavilion g6-2311ex
pavilion g6-2305ev
pavilion g6-2321so
pavilion g6-2310et
pavilion g6-2325sx
pavilion g6-2331sf
pavilion g6-2356ss
pavilion g6-2322sr
pavilion g6-2302et
pavilion g6-2337sr
pavilion g6-2322sx
pavilion g6-2303so
pavilion g6-2351so
pavilion g6-2309ss
pavilion g6-2376eg
pavilion g6-2304ev
pavilion g6-2352ee
pavilion g6-2347sg
HP pavilion g6-2308sr laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the HP pavilion g6-2308sr motherboard and HP pavilion g6-2308sr fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
