HP pavilion g7-2003sr Laptop Motherboard is Refurbished. the motherboard as a replacement for your hp laptop, this hp pavilion g7-2003sr motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original hp pavilion g7-2003sr system board.
Related Laptop Model:
pavilion g7-2210ec
pavilion g7-2054ca
pavilion g7-2350sm
pavilion g7-2206eo
pavilion g7-2113er
pavilion g7-2257sf
pavilion g7-2005sd
pavilion g7-2340sf
pavilion g7-2351sc
pavilion g7-2366eb
pavilion g7-2007so
pavilion g7-2002sd
pavilion g7-2315sg
pavilion g7-2355so
pavilion g7-2002sl
pavilion g7-2301ez
pavilion g7-2284sg
pavilion g7-2311sr
pavilion g7-2304sf
pavilion g7-2008eo
pavilion g7-2364er
pavilion g7-2246eg
pavilion g7-2256ss
pavilion g7-2201sd
pavilion g7-2001sg
pavilion g7-2318sz
pavilion g7-2303eg
pavilion g7-2240sb
pavilion g7-2210sb
pavilion g7-2278sa
pavilion g7-2302sf
pavilion g7-2204ss
HP pavilion g7-2003sr laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the HP pavilion g7-2003sr motherboard and HP pavilion g7-2003sr fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
Remark: Compatible CPU Brand:
INTEL
Product Description
HP pavilion g7-2003sr Laptop Motherboard is Refurbished. the motherboard as a replacement for your hp laptop, this hp pavilion g7-2003sr motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original hp pavilion g7-2003sr system board.
Related Laptop Model:
pavilion g7-2304sg
pavilion g7-2159er
pavilion g7-2147sf
pavilion g7-2030ca
pavilion g7-2231sb
pavilion g7-2335sb
pavilion g7-2110st
pavilion g7-2241sf
pavilion g7-2377er
pavilion g7-2002ev
pavilion g7-2128so
pavilion g7-2248sg
pavilion g7-2296eg
pavilion g7-2060sf
pavilion g7-2352sg
pavilion g7-2312sf
pavilion g7-2252er
pavilion g7-2004sl
pavilion g7-2270sd
pavilion g7-2381eg
pavilion g7-2160sb
pavilion g7-2116er
pavilion g7-2261sb
pavilion g7-2001er
pavilion g7-2255sr
pavilion g7-2142sf
pavilion g7-2302sf
pavilion g7-2220sb
pavilion g7-2026eo
pavilion g7-2201sf
pavilion g7-2206er
pavilion g7-2320sw
HP pavilion g7-2003sr laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the HP pavilion g7-2003sr motherboard and HP pavilion g7-2003sr fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
