HP pavilion g7-2004sr Laptop Motherboard is Refurbished. the motherboard as a replacement for your hp laptop, this hp pavilion g7-2004sr motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original hp pavilion g7-2004sr system board.
Related Laptop Model:
pavilion g7-2248sg
pavilion g7-2110sb
pavilion g7-2290eb
pavilion g7-2260sf
pavilion g7-2116sr
pavilion g7-2368er
pavilion g7-2277sa
pavilion g7-2204sf
pavilion g7-2055sb
pavilion g7-2325sb
pavilion g7-2110so
pavilion g7-2353so
pavilion g7-2305sd
pavilion g7-2327sr
pavilion g7-2216sg
pavilion g7-2150sg
pavilion g7-2204sd
pavilion g7-2252er
pavilion g7-2241sg
pavilion g7-2301sg
pavilion g7-2201si
pavilion g7-2396eg
pavilion g7-2210et
pavilion g7-2221eb
pavilion g7-2333sf
pavilion g7-2147sf
pavilion g7-2114er
pavilion g7-2252eb
pavilion g7-2151so
pavilion g7-2248eb
pavilion g7-2202sr
pavilion g7-2226ez
HP pavilion g7-2004sr laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the HP pavilion g7-2004sr motherboard and HP pavilion g7-2004sr fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
Remark: Compatible CPU Brand:
INTEL
Product Description
HP pavilion g7-2004sr Laptop Motherboard is Refurbished. the motherboard as a replacement for your hp laptop, this hp pavilion g7-2004sr motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original hp pavilion g7-2004sr system board.
Related Laptop Model:
pavilion g7-2205eo
pavilion g7-2254sf
pavilion g7-2274sd
pavilion g7-2360sf
pavilion g7-2001sg
pavilion g7-2008eo
pavilion g7-2110st
pavilion g7-2396eg
pavilion g7-2114er
pavilion g7-2149sf
pavilion g7-2003sr
pavilion g7-2310sw
pavilion g7-2127so
pavilion g7-2373sd
pavilion g7-2221sf
pavilion g7-2015sz
pavilion g7-2201eo
pavilion g7-2376sr
pavilion g7-2060sf
pavilion g7-2260sf
pavilion g7-2252sr
pavilion g7-2311sb
pavilion g7-2125sb
pavilion g7-2307sf
pavilion g7-2364er
pavilion g7-2366er
pavilion g7-2000em
pavilion g7-2206er
pavilion g7-2003ev
pavilion g7-2203sd
pavilion g7-2204sg
pavilion g7-2349sf
HP pavilion g7-2004sr laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the HP pavilion g7-2004sr motherboard and HP pavilion g7-2004sr fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
