HP Touchsmart TX2-1308au Laptop Motherboard is Refurbished. the motherboard as a replacement for your hp laptop, this hp touchsmart tx2-1308au motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original hp touchsmart tx2-1308au system board.
Related Laptop Model:
Touchsmart TX2-1021au
Touchsmart TX2-1109au
Touchsmart TX2-1219au
Touchsmart TX2-1322au
Touchsmart TX2-1305au
Touchsmart TX2-1274nr
Touchsmart TX2-1013au
Touchsmart TX2-1123au
Touchsmart TX2-1012au
Touchsmart TX2-1055ee
Touchsmart TX2-1204au
Touchsmart TX2-1224ca
Touchsmart TX2-1315au
Touchsmart TX2-1118au
Touchsmart TX2-1010et
Touchsmart TX2-1208au
Touchsmart TX2-1270us
Touchsmart TX2-1319au
Touchsmart TX2-1050ep
Touchsmart TX2-1111au
Touchsmart TX2-1011au
Touchsmart TX2-1031cm
Touchsmart TX2-1040br
Touchsmart TX2-1099eg
Touchsmart TX2-1051xx
Touchsmart TX2-1015au
Touchsmart TX2-1310au
Touchsmart TX2-1116au
Touchsmart TX2-1024ca
Touchsmart TX2-1313au
Touchsmart TX2-1014au
Touchsmart TX2-1019au
HP Touchsmart TX2-1308au laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the HP Touchsmart TX2-1308au motherboard and HP Touchsmart TX2-1308au fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
