SONY Vaio VGN-SZ58GN/C Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vgn-sz58gn/c motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vgn-sz58gn/c system board.
Related Laptop Model:
Vaio VGN-SZ62MN/B
Vaio VGN-SZ82S
VGN-SZ120PB
VAIO PCG-6J2L
VGN-SZ780E
Vaio VGN-SZ28LP
Vaio VGN-SZ433N/B
VGN-SZ210P
VGN-SZ740N1
Vaio VGN-SZ3XRP/C
Vaio VGN-SZ85S
VGN-SZ281P
Vaio VGN-SZ58GN
Vaio VGN-SZ81S
VGN-SZ440N
Vaio VGN-SZ6RXN/C
VGN-SZ140P
VGN-SZ480NW5
Vaio VGN-SZ55B/B
Vaio VGN-SZ210P/B
Vaio VGN-SZ92PS
Vaio VGN-SZ72MN/B
VGN-SZ430N
Vaio VGN-SZ3VWP
VGN-SZ220
VGN-SZ140PC
Vaio VGN-SZ43TN/B
Vaio VGN-SZ48CN
Vaio VGN-SZ84NS
Vaio VGN-SZ2XP/CF
Vaio VGN-SZ28TP
Vaio VGN-SZ28GP/C
SONY Vaio VGN-SZ58GN/C laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VGN-SZ58GN/C motherboard and SONY Vaio VGN-SZ58GN/C fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
