SONY Vaio VPC-EH25FD Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpc-eh25fd motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpc-eh25fd system board.
Related Laptop Model:
Vaio VPC-EH28FGP
Vaio VPC-EH2C1E/B
Vaio VPC-EH22FX/L
Vaio VPC-EH2M1E/B
Vaio VPC-EH2AFX/B
Vaio VPC-EH13FX/P
Vaio VPC-EH25FD/B
Vaio VPC-EH1EGX
Vaio VPC-EH2EFXB
Vaio VPC-EH1S8E/B
Vaio VPC-EH1M9R/B
Vaio VPC-EH15FX/B
Vaio VPC-EH2E1R/B
Vaio VPC-EH2DFXB
Vaio VPC-EH24FX/B
Vaio VPC-EH11FX/W
Vaio VPC-EH12FX/L
Vaio VPC-EH2D1E/W
Vaio VPC-EH2C1E/W
Vaio VPC-EH13FX/B
Vaio VPC-EH27FX/L
Vaio VPC-EH2Z1E/L
Vaio VPC-EH1S1E/W
Vaio VPC-EH11FX
Vaio VPC-EH27FGW
Vaio VPC-EH2J1R/L
Vaio VPC-EH18GM/B
Vaio VPC-EH13FX
Vaio VPC-EH2C5E
Vaio VPC-EH25FM/B
Vaio VPC-EH10EB/W
Vaio VPC-EH2GGX
SONY Vaio VPC-EH25FD laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPC-EH25FD motherboard and SONY Vaio VPC-EH25FD fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
