SONY Vaio VPCEA21FD/T Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcea21fd/t motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcea21fd/t system board.
Related Laptop Model:
Vaio VPCEB17FB/B
Vaio VPCEB3BFX/W
Vaio VPCEA2UFX/P
Vaio VPCEA3M1E/G
Vaio VPCEA46FM/W
Vaio VPCEB14FD/BI
Vaio VPCEA3S1E/L
Vaio VPCEA3L1E/V
Vaio VPCEA36FM/L
Vaio VPCEB24FD/PI
Vaio VPCEB3J1E/BQ
Vaio VPCEB1QGX
Vaio VPCEA2UFX/B
Vaio VPCEB1TGX
Vaio VPCEA25FX/T
Vaio VPCEB3D4R
Vaio VPCEB2KGX
Vaio VPCEB26FX/BI
Vaio VPCEB45FX
Vaio VPCEB1S0E/WI
Vaio VPCEB11GD/BI
Vaio VPCEB36GX/BJ
Vaio VPCEA2M1R/BJ
Vaio VPCEB1S1R/T
Vaio VPCEB36GX
Vaio VPCEA3Z1R/N
Vaio VPCEB44FX/T
Vaio VPCEA45FL/L
Vaio VPCEB290L
Vaio VPCEB2JFX/L
Vaio VPCEB44FX/BJ
Vaio VPCEB17FX/G
SONY Vaio VPCEA21FD/T laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEA21FD/T motherboard and SONY Vaio VPCEA21FD/T fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
