SONY Vaio VPCEA2S1E/W Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcea2s1e/w motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcea2s1e/w system board.
Related Laptop Model:
Vaio VPCEB37FD/P
Vaio VPCEB1AFX
Vaio VPCEA3M1E
Vaio VPCEB4CGX/BJ
Vaio VPCEA35FL/G
Vaio VPCEB4E0E/PI
Vaio VPCEB33FD/W
Vaio VPCEB32FM/WI
Vaio VPCEA37FL
Vaio VPCEB4AFD/V
Vaio VPCEB33FX/WI
Vaio VPCEB15FX/WI
Vaio VPCEA23FB
Vaio VPCEB2E9R/WI
Vaio VPCEB3L1E/PI
Vaio VPCEB35FD/WI
Vaio VPCEA47FX/G
Vaio VPCEB11GD/BI
Vaio VPCEB2Z0E/BQ
Vaio VPCEA2UFX/B
Vaio VPCEA3UFX/BJ
Vaio VPCEA3BFX/BJ
Vaio VPCEB1LFX/BI
Vaio VPCEB2TGX
Vaio VPCEA2QGX
Vaio VPCEB12FD
Vaio VPCEB1E0E
Vaio VPCEA37FX/P
Vaio VPCEB36GX/BJ
Vaio VPCEB2RFX/P
Vaio VPCEB2GFX
Vaio VPCEA44FX/T
SONY Vaio VPCEA2S1E/W laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEA2S1E/W motherboard and SONY Vaio VPCEA2S1E/W fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
