SONY Vaio VPCEA3M1E/B Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcea3m1e/b motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcea3m1e/b system board.
Related Laptop Model:
Vaio VPCEB4LFX
Vaio VPCEB24FD/WI
Vaio VPCEB2KGX
Vaio VPCEA44FX/WI
Vaio VPCEB3M1R/WI
Vaio VPCEB1EGX
Vaio VPCEA2VFX/W
Vaio VPCEB3B4R
Vaio VPCEB18FD/WI
Vaio VPCEB1E0E/WI
Vaio VPCEB2E4E
Vaio VPCEB3GGX/BJ
Vaio VPCEB33FD/BJ
Vaio VPCEB46FX/T
Vaio VPCEB3AFM/BJ
Vaio VPCEA25FL
Vaio VPCEA43FX/WI
Vaio VPCEB33FD
Vaio VPCEA4AFX/B
Vaio VPCEB1S0E
Vaio VPCEA3S1R/P
Vaio VPCEB43FX/WI
Vaio VPCEB17FX/W
Vaio VPCEB25FX/BI
Vaio VPCEA3M1E
Vaio VPCEA3L1E/W
Vaio VPCEB4AFX/WI
Vaio VPCEA2WFX/BQ
Vaio VPCEB33FX/WI
Vaio VPCEA3EGX/BJ
Vaio VPCEB1M1E/T
Vaio VPCEB2HFX
SONY Vaio VPCEA3M1E/B laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEA3M1E/B motherboard and SONY Vaio VPCEA3M1E/B fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
