SONY Vaio VPCEA3M1R/PI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcea3m1r/pi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcea3m1r/pi system board.
Related Laptop Model:
Vaio VPCEB3SGX
Vaio VPCEA4S1E/W
Vaio VPCEB18FD/BI
Vaio VPCEA25FB/B
Vaio VPCEA3HGX/BJ
Vaio VPCEB22FX/WI
Vaio VPCEA3M1E/G
Vaio VPCEB17FB/B
Vaio VPCEB1DGX/BI
Vaio VPCEB35FGP
Vaio VPCEA3S1E/L
Vaio VPCEB37FX
Vaio VPCEA43FB
Vaio VPCEA2GFX
Vaio VPCEB42FM/BJ
Vaio VPCEA43FX/WI
Vaio VPCEA3B4E
Vaio VPCEB27FD/B
Vaio VPCEB4F4E
Vaio VPCEB46FX
Vaio VPCEA20EL/WI
Vaio VPCEA2MGX
Vaio VPCEB3S1R/WI
Vaio VPCEB1AGGBI
Vaio VPCEB16FD/B
Vaio VPCEB2AFD
Vaio VPCEA45FL/W
Vaio VPCEA1S1R/W
Vaio VPCEA3AFX/BJ
Vaio VPCEB1E9R/WI
Vaio VPCEA4DGX/BJ
Vaio VPCEB1HGX
SONY Vaio VPCEA3M1R/PI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEA3M1R/PI motherboard and SONY Vaio VPCEA3M1R/PI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
