SONY Vaio VPCEA3S1R/B Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcea3s1r/b motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcea3s1r/b system board.
Related Laptop Model:
Vaio VPCEB33FD/G
Vaio VPCEB2AFD/BQ
Vaio VPCEB35FD/WI
Vaio VPCEA3L1E/P
Vaio VPCEA15FGP
Vaio VPCEB1E0E/WI
Vaio VPCEB25FX/BI
Vaio VPCEB1SFX/BI
Vaio VPCEA2UFX/B
Vaio VPCEA1Z1E
Vaio VPCEB33FD/L
Vaio VPCEA4BGX/BJ
Vaio VPCEB4CGX
Vaio VPCEB2E9R/BQ
Vaio VPCEB33GX/T
Vaio VPCEB3NFX/BJ
Vaio VPCEB190L
Vaio VPCEB2E4E
Vaio VPCEB2JFX/W
Vaio VPCEB36GM
Vaio VPCEA2GFX
Vaio VPCEB33FD/W
Vaio VPCEA2TGX/BI
Vaio VPCEA43FB/B
Vaio VPCEB22FX/WI
Vaio VPCEB4AFD/L
Vaio VPCEA33FB/W
Vaio VPCEB1HFX/BI
Vaio VPCEB19FS
Vaio VPCEA21FD/WI
Vaio VPCEB2AFD
Vaio VPCEB14FX/BI
SONY Vaio VPCEA3S1R/B laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEA3S1R/B motherboard and SONY Vaio VPCEA3S1R/B fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
