SONY Vaio VPCEA4M1R/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcea4m1r/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcea4m1r/wi system board.
Related Laptop Model:
Vaio VPCEB11GD/BI
Vaio VPCEA2S1R/B
Vaio VPCEB3MFX
Vaio VPCEB290S
Vaio VPCEA3S1E/P
Vaio VPCEB2S1R/WI
Vaio VPCEB2E4E
Vaio VPCEB4AFX/WI
Vaio VPCEB45FX/BJ
Vaio VPCEB16FD/L
Vaio VPCEB1Z0E/B
Vaio VPCEA43FB/L
Vaio VPCEB11GD
Vaio VPCEA22FX/G
Vaio VPCEA3HGX
Vaio VPCEB32FM/WI
Vaio VPCEB1S8E/WI
Vaio VPCEA3A4E
Vaio VPCEB1E8E/WI
Vaio VPCEA33FB/L
Vaio VPCEA3FFX
Vaio VPCEA20EL/WI
Vaio VPCEB16FD/G
Vaio VPCEB37FD/P
Vaio VPCEB27FX/G
Vaio VPCEB22FX/WI
Vaio VPCEA2UFX/P
Vaio VPCEB17FGB
Vaio VPCEB2TFX/W
Vaio VPCEB24FD/P
Vaio VPCEB1QGX
Vaio VPCEB2FFX
SONY Vaio VPCEA4M1R/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEA4M1R/WI motherboard and SONY Vaio VPCEA4M1R/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
