SONY Vaio VPCEB11FD/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb11fd/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb11fd/wi system board.
Related Laptop Model:
Vaio VPCEB14FX/T
Vaio VPCEA2S1E/W
Vaio VPCEA3S1R/B
Vaio VPCEA44FX/T
Vaio VPCEA2S1E/L
Vaio VPCEA2VGX/BI
Vaio VPCEA36FX/T
Vaio VPCEB4F4E
Vaio VPCEB33FM/WI
Vaio VPCEB37FD/P
Vaio VPCEB3AFD/T
Vaio VPCEB17FX/W
Vaio VPCEB2SFX/P
Vaio VPCEB3B4R
Vaio VPCEA44FX/WI
Vaio VPCEB1S1R/WI
Vaio VPCEB1E9R/WI
Vaio VPCEB19FL/BI
Vaio VPCEB3AFX/T
Vaio VPCEB11GX/BI
Vaio VPCEB4AFX/BJ
Vaio VPCEB1S1E/BJ
Vaio VPCEA35FL/B
Vaio VPCEB2M1E/PI
Vaio VPCEA4S1E/W
Vaio VPCEB13EL/WI
Vaio VPCEB24FD
Vaio VPCEB3DFX/BJ
Vaio VPCEB12FD/WI
Vaio VPCEA23FB/W
Vaio VPCEB12FX/BI
Vaio VPCEB2JFX/W
SONY Vaio VPCEB11FD/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB11FD/WI motherboard and SONY Vaio VPCEB11FD/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
