SONY Vaio VPCEB12FD/W Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb12fd/w motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb12fd/w system board.
Related Laptop Model:
Vaio VPCEB11GX
Vaio VPCEA43FB/B
Vaio VPCEB2S1E/WI
Vaio VPCEB23FX/WI
Vaio VPCEA20EL
Vaio VPCEB3J0E
Vaio VPCEB31FD
Vaio VPCEB4FFX/BJ
Vaio VPCEA47FX/L
Vaio VPCEA290S
Vaio VPCEB3A4E
Vaio VPCEB2PGX
Vaio VPCEB1SFX/BIC
Vaio VPCEB1E8E/WI
Vaio VPCEA4CGX/BJ
Vaio VPCEA3KGX/BJ
Vaio VPCEB22FX/WI
Vaio VPCEA33FD/W
Vaio VPCEA3FFX
Vaio VPCEB4L1R/WI
Vaio VPCEB3E1R/BQ
Vaio VPCEB3PGX
Vaio VPCEB45FGP
Vaio VPCEB3KFX/BJ
Vaio VPCEB2FFX/B
Vaio VPCEA4AFX/B
Vaio VPCEA3S1R/V
Vaio VPCEB3M1E/BQ
Vaio VPCEB1FGX/BI
Vaio VPCEA23FB/G
Vaio VPCEB33FD/B
Vaio VPCEA3M1E/V
SONY Vaio VPCEB12FD/W laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB12FD/W motherboard and SONY Vaio VPCEB12FD/W fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
