SONY Vaio VPCEB13FX/BIC Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb13fx/bic motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb13fx/bic system board.
Related Laptop Model:
Vaio VPCEB2TFX/L
Vaio VPCEB1SFX
Vaio VPCEA47FX
Vaio VPCEA3SFX
Vaio VPCEB4E9R/BQ
Vaio VPCEB47GM/WI
Vaio VPCEA46FM/W
Vaio VPCEB3MFX/WI
Vaio VPCEB1AGGBI
Vaio VPCEB1S1E/BJ
Vaio VPCEA36FX/L
Vaio VPCEB45FX/BJ
Vaio VPCEA22FX/G
Vaio VPCEB1DGX
Vaio VPCEB4E1R/BQ
Vaio VPCEA35FL
Vaio VPCEB22FX/PI
Vaio VPCEA2S1R/G
Vaio VPCEB1E9J
Vaio VPCEB3AFX/T
Vaio VPCEB31FX/BJ
Vaio VPCEA45FX/T
Vaio VPCEB2H4E
Vaio VPCEA3LGX/BJ
Vaio VPCEB4MFX/W
Vaio VPCEA33FX/V
Vaio VPCEB15FX/BI
Vaio VPCEB31FD/WI
Vaio VPCEA44FX/WI
Vaio VPCEA33FD/V
Vaio VPCEB3BFX
Vaio VPCEB23FM/BI
SONY Vaio VPCEB13FX/BIC laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB13FX/BIC motherboard and SONY Vaio VPCEB13FX/BIC fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
