SONY Vaio VPCEB16FD/W Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb16fd/w motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb16fd/w system board.
Related Laptop Model:
Vaio VPCEB4AFD/P
Vaio VPCEB1AGX/BI
Vaio VPCEA20EL
Vaio VPCEB11GX/BI
Vaio VPCEB2M1R/PI
Vaio VPCEA3S1R/P
Vaio VPCEA3S1E/P
Vaio VPCEB11GD/BI
Vaio VPCEB44FX/T
Vaio VPCEB4E1E/WI
Vaio VPCEB1KGX
Vaio VPCEA3CFX/V
Vaio VPCEB26FX/T
Vaio VPCEB33FD/G
Vaio VPCEA290X
Vaio VPCEB1JFX/G
Vaio VPCEA1S1R/W
Vaio VPCEB26FX
Vaio VPCEB1E8E/WI
Vaio VPCEB2M1E/PI
Vaio VPCEB22FX/PI
Vaio VPCEB15FM/WI
Vaio VPCEA22FX/W
Vaio VPCEB35FD
Vaio VPCEA2S1R/W
Vaio VPCEB23FX/T
Vaio VPCEB1QGX
Vaio VPCEB2A4E
Vaio VPCEB43FD/BJ
Vaio VPCEA23FB/P
Vaio VPCEA31FX/BJ
Vaio VPCEB29FL
SONY Vaio VPCEB16FD/W laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB16FD/W motherboard and SONY Vaio VPCEB16FD/W fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
