SONY Vaio VPCEB1J8E/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb1j8e/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb1j8e/wi system board.
Related Laptop Model:
Vaio VPCEA36FX/T
Vaio VPCEB26GX/T
Vaio VPCEB44FX/T
Vaio VPCEA31FX
Vaio VPCEB24FD/T
Vaio VPCEA3M1E/L
Vaio VPCEB3F4E
Vaio VPCEB3AFM/BJ
Vaio VPCEB1SFX/BI
Vaio VPCEA4M1R/BJ
Vaio VPCEA2S1R/B
Vaio VPCEB2G4E
Vaio VPCEB1AGX/BI
Vaio VPCEA2WGX/BI
Vaio VPCEB1S1R/WI
Vaio VPCEB4C5E
Vaio VPCEB42FX/T
Vaio VPCEB24FD/G
Vaio VPCEB24FD/L
Vaio VPCEB1E0E/T
Vaio VPCEB1AGGBI
Vaio VPCEB3L1E/PI
Vaio VPCEB11FM
Vaio VPCEB1M1E
Vaio VPCEA3SFX/BQ
Vaio VPCEB3PGX/BJ
Vaio VPCEB25FL
Vaio VPCEB15FX/T
Vaio VPCEB14FX/T
Vaio VPCEB29GL
Vaio VPCEB4FFX
Vaio VPCEA4BGX
SONY Vaio VPCEB1J8E/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB1J8E/WI motherboard and SONY Vaio VPCEB1J8E/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
