SONY Vaio VPCEB1S0E/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb1s0e/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb1s0e/wi system board.
Related Laptop Model:
Vaio VPCEB17FX
Vaio VPCEB33FD/BJ
Vaio VPCEB1E1R/T
Vaio VPCEA20EL/WI
Vaio VPCEB1E1R/BJ
Vaio VPCEA3BFX/BJ
Vaio VPCEB1GGX
Vaio VPCEB16FX/G
Vaio VPCEA35FB
Vaio VPCEA15FGP
Vaio VPCEB3BFX
Vaio VPCEB290X
Vaio VPCEB37FD/P
Vaio VPCEA46FGL
Vaio VPCEA3S1E/G
Vaio VPCEA2LGX
Vaio VPCEB1TFX/B
Vaio VPCEB1HFX/BI
Vaio VPCEA2M1R/PI
Vaio VPCEB11FX/BI
Vaio VPCEB3E1E/WI
Vaio VPCEA3L1E/G
Vaio VPCEA2WFX
Vaio VPCEA25FGP
Vaio VPCEA36FX/L
Vaio VPCEB1BGX
Vaio VPCEA35FGW
Vaio VPCEB33FM/WI
Vaio VPCEA37FL/L
Vaio VPCEA2VGX/T
Vaio VPCEA25FX/T
Vaio VPCEB12FD/BI
SONY Vaio VPCEB1S0E/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB1S0E/WI motherboard and SONY Vaio VPCEB1S0E/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
