SONY Vaio VPCEB21FD/BQ Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb21fd/bq motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb21fd/bq system board.
Related Laptop Model:
Vaio VPCEB4M1R/BQ
Vaio VPCEB35FX
Vaio VPCEB3L0E/BQ
Vaio VPCEA37FX/G
Vaio VPCEB14FX
Vaio VPCEB33FX/BJ
Vaio VPCEA24FM/L
Vaio VPCEB37FD/G
Vaio VPCEB2S1E/WI
Vaio VPCEA33FX/L
Vaio VPCEB2E4E
Vaio VPCEA21FD/PI
Vaio VPCEA2HFX/B
Vaio VPCEB4J1E/WI
Vaio VPCEB2Z1E/BQ
Vaio VPCEB4E0E/WI
Vaio VPCEB1E9R/WI
Vaio VPCEB33FM/WI
Vaio VPCEB1J1E/WI
Vaio VPCEA45FL/P
Vaio VPCEB28FX/B
Vaio VPCEB1S8E/BJ
Vaio VPCEA20EL/WI
Vaio VPCEB2E9R/WI
Vaio VPCEA46FM/P
Vaio VPCEB33GX/BJ
Vaio VPCEB26GM/BI
Vaio VPCEA4CGX
Vaio VPCEA2M1R/WI
Vaio VPCEB2RFX/L
Vaio VPCEB42FM/T
Vaio VPCEA2S1E/G
SONY Vaio VPCEB21FD/BQ laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB21FD/BQ motherboard and SONY Vaio VPCEB21FD/BQ fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
