SONY Vaio VPCEB2M0E/T Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb2m0e/t motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb2m0e/t system board.
Related Laptop Model:
Vaio VPCEA27FL/L
Vaio VPCEB1CGX/BI
Vaio VPCEB15FX/BI
Vaio VPCEA3CFX/P
Vaio VPCEA3S1E/P
Vaio VPCEB2AFD/BQ
Vaio VPCEA25FX
Vaio VPCEB1E1R/WI
Vaio VPCEB1NFX/L
Vaio VPCEB1AGGBI
Vaio VPCEB1S1R/WI
Vaio VPCEA47FX
Vaio VPCEB33FM/BJ
Vaio VPCEA33FB/V
Vaio VPCEA2JFX/P
Vaio VPCEB1AGX
Vaio VPCEB2TFX/W
Vaio VPCEB1PFX
Vaio VPCEB3RFX
Vaio VPCEB4B4E
Vaio VPCEB3MFX
Vaio VPCEB4AFX/WI
Vaio VPCEA27FX/P
Vaio VPCEB22FX/WI
Vaio VPCEB3L1E/T
Vaio VPCEB37FX
Vaio VPCEB1HGX/BI
Vaio VPCEB4J1E/WI
Vaio VPCEB3SGX/BJ
Vaio VPCEB26GM/T
Vaio VPCEB17FL/WI
Vaio VPCEA43FB/L
SONY Vaio VPCEB2M0E/T laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB2M0E/T motherboard and SONY Vaio VPCEB2M0E/T fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
