SONY Vaio VPCEB2MGX/BI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb2mgx/bi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb2mgx/bi system board.
Related Laptop Model:
Vaio VPCEB43FX/BJ
Vaio VPCEA3M1E/B
Vaio VPCEB1E1R/T
Vaio VPCEA45FL/P
Vaio VPCEA3Z1R/BQ
Vaio VPCEA37FX/G
Vaio VPCEB2HFX/B
Vaio VPCEB1GGX
Vaio VPCEA1C5E
Vaio VPCEB1JFX/G
Vaio VPCEA31FX/WI
Vaio VPCEA27FX
Vaio VPCEA4AFX/L
Vaio VPCEA37FX/V
Vaio VPCEA35FL/P
Vaio VPCEB35FD
Vaio VPCEA3UFX
Vaio VPCEB45FX
Vaio VPCEA4BGX/BJ
Vaio VPCEB33FD/T
Vaio VPCEA3S1E/W
Vaio VPCEA2TGX/BI
Vaio VPCEA25FL
Vaio VPCEB11FD/WI
Vaio VPCEB35FD/WI
Vaio VPCEA33FB/L
Vaio VPCEA3CFX/V
Vaio VPCEA2PGX
Vaio VPCEB27FD/W
Vaio VPCEB18FD
Vaio VPCEB42FX/BJ
Vaio VPCEB27FGW
SONY Vaio VPCEB2MGX/BI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB2MGX/BI motherboard and SONY Vaio VPCEB2MGX/BI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
