SONY Vaio VPCEB2S1E/PI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb2s1e/pi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb2s1e/pi system board.
Related Laptop Model:
Vaio VPCEA47FX/W
Vaio VPCEA2WGX/BI
Vaio VPCEB2TFX/BI
Vaio VPCEB1PFX/B
Vaio VPCEB12FD/T
Vaio VPCEA290S
Vaio VPCEB4C5E
Vaio VPCEA3BFX/BJ
Vaio VPCEB3RFX
Vaio VPCEB1JFX
Vaio VPCEB26FX/WI
Vaio VPCEB15EL/BI
Vaio VPCEA21FD/PI
Vaio VPCEB29GX
Vaio VPCEA33FB/W
Vaio VPCEB1M1E/BJ
Vaio VPCEB4GFX
Vaio VPCEB32FX/T
Vaio VPCEB25FX/PI
Vaio VPCEA46FM/W
Vaio VPCEB1A4E
Vaio VPCEA2LGX
Vaio VPCEA1S1R/W
Vaio VPCEB1MFX/BI
Vaio VPCEB3J1E/T
Vaio VPCEB25FX
Vaio VPCEB2S1E/WI
Vaio VPCEB16FX/L
Vaio VPCEB1LFX/BI
Vaio VPCEA23FB
Vaio VPCEA40EL/L
Vaio VPCEA35FL
SONY Vaio VPCEB2S1E/PI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB2S1E/PI motherboard and SONY Vaio VPCEB2S1E/PI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.