SONY Vaio VPCEB2S1R/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb2s1r/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb2s1r/wi system board.
Related Laptop Model:
Vaio VPCEA4S1E/W
Vaio VPCEA20EL/WI
Vaio VPCEB16FX/P
Vaio VPCEA3PGX
Vaio VPCEA36FX/WI
Vaio VPCEB3E4R
Vaio VPCEB4S1R/WI
Vaio VPCEB4AFX
Vaio VPCEB2AFD/WI
Vaio VPCEB27FD
Vaio VPCEA2S1R/P
Vaio VPCEB21FD
Vaio VPCEB4X8E/BQ
Vaio VPCEA3M1E/G
Vaio VPCEB4F4E
Vaio VPCEA24FM/G
Vaio VPCEA45FL/L
Vaio VPCEB4FFX/BJ
Vaio VPCEA47FX/L
Vaio VPCEB3AFX/WI
Vaio VPCEB3MFX
Vaio VPCEB32FX/T
Vaio VPCEB4X1E/BQ
Vaio VPCEA36FM/T
Vaio VPCEA15FGP
Vaio VPCEA2M1R/PI
Vaio VPCEA3L1E/W
Vaio VPCEA47FX
Vaio VPCEB3GGX/BJ
Vaio VPCEB14FX/WI
Vaio VPCEB3AFX
Vaio VPCEB1JFX
SONY Vaio VPCEB2S1R/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB2S1R/WI motherboard and SONY Vaio VPCEB2S1R/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
