SONY Vaio VPCEB2TGX/BI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb2tgx/bi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb2tgx/bi system board.
Related Laptop Model:
Vaio VPCEA20EL/WI
Vaio VPCEA3HGX
Vaio VPCEB1J1E
Vaio VPCEB4EFX
Vaio VPCEB1LFX/WI
Vaio VPCEB3CFX
Vaio VPCEB4L1R/BQ
Vaio VPCEA3M1R/PI
Vaio VPCEA35FB/B
Vaio VPCEA1S1R/L
Vaio VPCEA43FB/P
Vaio VPCEA3CFX
Vaio VPCEB1HGX/BI
Vaio VPCEB1JFX/W
Vaio VPCEB44FX
Vaio VPCEB28FX/P
Vaio VPCEA44FX/WI
Vaio VPCEB43FD/WI
Vaio VPCEA31FX/T
Vaio VPCEA43FX/WI
Vaio VPCEA22FX
Vaio VPCEA37FX/L
Vaio VPCEB1NFX/P
Vaio VPCEA30EL
Vaio VPCEA33FD/G
Vaio VPCEB1HFX/BI
Vaio VPCEB2RFX/P
Vaio VPCEB4Z1E/BQ
Vaio VPCEB1E1R/T
Vaio VPCEB1HGX
Vaio VPCEA2VGX/T
Vaio VPCEB22FX
SONY Vaio VPCEB2TGX/BI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB2TGX/BI motherboard and SONY Vaio VPCEB2TGX/BI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
