SONY Vaio VPCEB2TGX Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb2tgx motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb2tgx system board.
Related Laptop Model:
Vaio VPCEB2FFX
Vaio VPCEB4Z1E/BQ
Vaio VPCEB4MFX/L
Vaio VPCEB4HGX/BJ
Vaio VPCEB4E9E/BQ
Vaio VPCEB3C4R
Vaio VPCEB2JFX/B
Vaio VPCEA3M1E/V
Vaio VPCEB3CFX/WI
Vaio VPCEB4L1E/T
Vaio VPCEB15FM/BI
Vaio VPCEA48FX/BJ
Vaio VPCEB16FX/G
Vaio VPCEB1M1E/BJ
Vaio VPCEA46FM/G
Vaio VPCEB13EB
Vaio VPCEA37FL
Vaio VPCEB3RFX/V
Vaio VPCEA2WGX/BI
Vaio VPCEB16FX/L
Vaio VPCEA4M1R/PI
Vaio VPCEB24FX/PI
Vaio VPCEB3EFX/BJ
Vaio VPCEA3M1E/W
Vaio VPCEB33FD/BJ
Vaio VPCEB25FX/PI
Vaio VPCEB3FGX/BJ
Vaio VPCEA2UFX/W
Vaio VPCEB32FX/T
Vaio VPCEB2MGX/BI
Vaio VPCEB32FM/WI
Vaio VPCEA23FB/L
SONY Vaio VPCEB2TGX laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB2TGX motherboard and SONY Vaio VPCEB2TGX fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
