SONY Vaio VPCEB2Z1R/B Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb2z1r/b motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb2z1r/b system board.
Related Laptop Model:
Vaio VPCEA36FM/V
Vaio VPCEA37FX/P
Vaio VPCEA45FL/W
Vaio VPCEA27FX/L
Vaio VPCEB3NFX
Vaio VPCEB35FX/WI
Vaio VPCEA2UFX/L
Vaio VPCEA33FD/V
Vaio VPCEB16FD/G
Vaio VPCEB2E9R/WI
Vaio VPCEB1E1R/T
Vaio VPCEB29FS
Vaio VPCEB4S1R/WI
Vaio VPCEA290X
Vaio VPCEA24FM/P
Vaio VPCEB1EGX
Vaio VPCEB3AFD
Vaio VPCEB18FD/WI
Vaio VPCEB4J1R/WI
Vaio VPCEB33FD/L
Vaio VPCEB43FX/T
Vaio VPCEA45FL
Vaio VPCEA45FL/B
Vaio VPCEA43FB/L
Vaio VPCEB1S1R/BJ
Vaio VPCEB2S1R/WI
Vaio VPCEA2VGX/T
Vaio VPCEB31FGPI
Vaio VPCEB4AFD/W
Vaio VPCEB3L0E/BQ
Vaio VPCEA3L1E/L
Vaio VPCEA36FM/P
SONY Vaio VPCEB2Z1R/B laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB2Z1R/B motherboard and SONY Vaio VPCEB2Z1R/B fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
