SONY Vaio VPCEB3M1R/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb3m1r/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb3m1r/wi system board.
Related Laptop Model:
Vaio VPCEB3KFX
Vaio VPCEA37FL/B
Vaio VPCEB1LFX
Vaio VPCEA3MGX/BJ
Vaio VPCEA2VFX
Vaio VPCEB15FB/BI
Vaio VPCEA33FD/P
Vaio VPCEA35FL
Vaio VPCEA30EL
Vaio VPCEA23FB/L
Vaio VPCEB3MFX/BJ
Vaio VPCEA36FM/P
Vaio VPCEA3PGX/BJ
Vaio VPCEB3DFX/BJ
Vaio VPCEA1S1E/W
Vaio VPCEB43FX/BJ
Vaio VPCEB11GX/BI
Vaio VPCEB27FX/L
Vaio VPCEA23FB/P
Vaio VPCEB14FX
Vaio VPCEB3L9E/BQ
Vaio VPCEB23FX/T
Vaio VPCEB28FX/G
Vaio VPCEB4MFX
Vaio VPCEB2H4E
Vaio VPCEB2E9R/BQ
Vaio VPCEB3BFX
Vaio VPCEB1BGX
Vaio VPCEB4E1R/WI
Vaio VPCEB3C4R
Vaio VPCEA33FX/P
Vaio VPCEB3AFD/BJ
SONY Vaio VPCEB3M1R/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB3M1R/WI motherboard and SONY Vaio VPCEB3M1R/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
