SONY Vaio VPCEB4J1R/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb4j1r/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb4j1r/wi system board.
Related Laptop Model:
Vaio VPCEB1RGX/BI
Vaio VPCEA3S1R/W
Vaio VPCEB42FX/WI
Vaio VPCEB1FGX
Vaio VPCEB1MFX/BI
Vaio VPCEA36FM/W
Vaio VPCEA2MGX/BI
Vaio VPCEB2TFX
Vaio VPCEB3F4E
Vaio VPCEB10E0E
Vaio VPCEB35FD
Vaio VPCEB2M1E/WI
Vaio VPCEA36FM/L
Vaio VPCEB19FX
Vaio VPCEB3L1E/WI
Vaio VPCEB1S8E/WI
Vaio VPCEA20FB/BI
Vaio VPCEA2LGX
Vaio VPCEA3TFX/BJ
Vaio VPCEB4EFX
Vaio VPCEB2NGX
Vaio VPCEB3B4R
Vaio VPCEA33FX
Vaio VPCEA33FB/V
Vaio VPCEB4M1E/BQ
Vaio VPCEB4BGX/BJ
Vaio VPCEB1B4E
Vaio VPCEB18FD/WI
Vaio VPCEB17FX/B
Vaio VPCEB26FX/WI
Vaio VPCEA21FD/PI
Vaio VPCEB29GS
SONY Vaio VPCEB4J1R/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB4J1R/WI motherboard and SONY Vaio VPCEB4J1R/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
