SONY Vaio VPCEB4S1R/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb4s1r/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb4s1r/wi system board.
Related Laptop Model:
Vaio VPCEB1E9R/BJ
Vaio VPCEB26GX/T
Vaio VPCEB3A4R
Vaio VPCEB3E1E/WI
Vaio VPCEB28FX/B
Vaio VPCEB33FD/B
Vaio VPCEB2S1E/BQ
Vaio VPCEB2S1R/BQ
Vaio VPCEB3AFD
Vaio VPCEA3CFX
Vaio VPCEA36FM/T
Vaio VPCEB1TFX/BI
Vaio VPCEB33FM
Vaio VPCEB4X0E/BQ
Vaio VPCEA3M1E
Vaio VPCEB11FX
Vaio VPCEB23FX/WI
Vaio VPCEB29FS
Vaio VPCEB2C4E
Vaio VPCEA36FM/BJ
Vaio VPCEB1M0E
Vaio VPCEA3SFX
Vaio VPCEA35FL/L
Vaio VPCEA31FX/T
Vaio VPCEB4L1E/WI
Vaio VPCEB17FX/G
Vaio VPCEA27FX/B
Vaio VPCEA4DGX
Vaio VPCEA36FM/WI
Vaio VPCEB1Z0E/B
Vaio VPCEA3CFX/L
Vaio VPCEB26GM/BI
SONY Vaio VPCEB4S1R/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB4S1R/WI motherboard and SONY Vaio VPCEB4S1R/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
